Although I have `showbreak` set for normal editing I would rather not see that in documentation. RFC.
Setting to `NONE` as per `:h showbreak`:
```
A window-local value overrules a global value. If the global value is
set and you want no value in the current window use NONE:
:setlocal showbreak=NONE
```
The dictionary returned by `pum_getpos()` uses `scrollbar` not
`scrollable` to indicate whether the scrollbar is visible or not.
In addition, the padding on the left side of the popup menu isn't
included in the output of `pum_getpos()`, meaning that both `col` and
`width` (as understood by nvim-cmp) are off by one when the cursor isn't
at column `0`.
These two issues were causing the documentation window and popup menu to
overlap.
* feat: completion menu borders (#472)
* feat(custom_entries_view): pass custom border option
* feat(window): calculate offset needed for borders
* fix(window): adjust window height w/ too many results
* fix(window): center scrollbar with borders
* ref(custom_entries_view): use `FloatBorder` for borders
* fix(window): offset at bottom of window
* ref(window): move height adjustment to more logical place
* fix(window): improve popup placement
* fix(window): `border_offset` always `0` first time
* feat(window): support compact scrollbar with border
* fix(window): completion popup on cursorline
* perf(window): simplify offset calculation
String indexing will result in the same thing as if I gated it behind
`type()` calls here.
* docs(window): add `border` to `cmp.WindowStyle`
* docs(window): correct `border_offset_scrollbar`
* perf(window): calulated row -> `screenrow`
This will also be more accurate since it accounts for wrapped lines, as
well as buffers.
* fix(window): edge case with multiple splits
* ref(winhighlight): don't specify defaults by default
`NormalFloat:NormalFloat` isn't needed, since `NormalFloat` defaults to
`NormalFloat`. As for `FloatBorder`, that should be set to `Floatborder`
rather than `NormalFloat` or else you get unintended artifacts on the
edges of borders.
* fix(window): popup covers cursor when scrollbar disappears
* ref(window): calc `border_offset_col` on `set_style`
* perf(window): remove unecessary `col` calculation
Taking it out didn't change anything about the popup behavior.
* feat: add `CmpItemMenuThumb` group
* feat(window): improve scrollbar appearance
* chore(window): remove references to unused property
* docs: document new option `thin_scrollbar`
* ref(plugin): remove background from `thin_scrollbar`
* feat(view): pass `thin_scrollbar` option to window
* feat(window): gate new `thin_scrollbar` behind option
* fix(window): cmdline bugging out
* fix(cmp): docs_view pops up overlapped when using borders
This is related to 1cfe2f7dfd. The
calculation for how the popup position is calculated was changed, and
so it needed to be reworked to include borders in order to be able to
work.
* ref: `thin_scrollbar` flag -> `scrollbar` option
This change allows users to define which character they will use for
their scrollbar.
* fix(window): use `scrollbar` setting for scrollbar character
Thanks @Astrantia for pointing this one out.
* docs(README): add completion appearance options to FAQ
* fix(): account for `border_offset_row` with `has_bottom_space`
* style(custom_entries_view): group offset with `row`/`col`
* fix(window): scrollbar at full view height
Because the `bar_height` variable must be whole number, and must be rounded up
from a percent, there is a change that we will end up with the maximum
height as a number.
For example, `info.height` = 24 and `total` = 25.
* feat(window): allow scrollbar to be disabled
* fix(window): scrollbar size < 1
* ref(cmp): move border logic to `window.info`
* ref!: window highlighting based on borders
BREAKING CHANGE: `documentation.winhighlight` does not determine the
highlighting of the `documentation` view— `CmpWindow`
or `CmpBorderedWindow` depending on whether it has a
border.
* ref!: float appearance opts -> `cmp.setup.window`
`cmp.setup.completion.border` and `.scrollbar` were both moved to
`cmp.setup.window.completion.border` and `.scrollbar`
BREAKING CHANGE: `cmp.setup.documentation` has been moved to
`cmp.window.documentation`, as all of the pertaining
options were cosmetic.
TODO: document the change
* fix(window): attempt to get scrollbar's border
* fix(cmp): restore `view.menu.hl_group`
* fix(window): wrong scrollbar position
* ref: get default `CmpItemMenu` from border existence
* chore(cmp): remove old PR comments
* fix(window): scrollbar sometimes too big
* fix(window): docs far away with complete menu scrollbar
* perf(docs_view): reuse `border_width` value
* rev(cmp): restore `CmpItemMenu`
* ref(cmp): distinguish between `ScrollBar` and `ScrollThumb`
* fix(plugin): consistently refer to `Thumb` as `Thumb`
* rev(window): `Pmenu`-style scrollbar when no border
* fix(window): docs_view size wrong when first shown
* fix(window): docs_view scrollbar not responding to size
* fix(window): scrollbar sometimes to small, take 2
* fix(window): scrollbar bg not hiding
* ref(docs_view): put docs closer to completion menu
* fix(window): scrollbar position wrong with right border
* ref(config): add default border to documentation
* fix(window): scrollbar too close without border
* ref(plugin): link `CmpWindow` to `Pmenu`
I set `CmpWindow` to `NormalFloat`, because that is what you would
expect a floating window to use for a highlight group. However at
request I changed it to `Pmenu`.
* ref(plugin): link `CmpWindowBorder` to `CmpWindow`
* fix(window): scrollbar following thumb while scrolling
* ref: add more highlight groups
There just weren't enough highlight groups to satisfy the demands of the
project. If you change `CmpWindow` to `Pmenu`, then the `docs_view`
becomes `Pmenu` as well when on `main` it is `NormalFloat`.
* fix(window): scrollbar overlapping `docs_view` by default
* ref: remove `Bordered` highlight variants
* ref(utils): extract whitespace check to func
* feat: `window.completion.zindex` setting
* ref: `maxwidth|height` -> `max_`
* ref: simplify highlight groups
* feat: `window.*.winhighlight` setting
* ref(utils): `is_whitespace_char` -> `is_visible`
As hrsh7th noted, `''` is not a whitespace character. Yet, it is
necessary to group `''` and `' '` together for certain border behaviors
that are based on visibility. Thus I have renamed the function
* feat: specify `window.*.winhighlight` for un/bordered
* fix(custom_entries_view): set `winhighlight` on `open`
* ref: remove `Cmp*Scroll*` variants
There's no way for `window` to know which kind of window it is drawing a
scrollbar on. Simpler to just have one kind of scrollbar
* feat: distinguish between bordered and unbordered
* ref(cmp): `is_visible` -> `is_invisible`
That's what the function was checking for.
* fix(default): mislabeling of `default` and `bordered`
* chore: rebase fixup
* Change default highlight
* Add misc.rep
* Fix left-side docs_view with scrollbar
* Fix scrollbar
* Fix sbar/thumb win
Improve highlights
* Remove scrollbar cutomization for now
* Remove scrollbar option
* Simplify implementation
* Fix doc width
* Fix outdated docs
* Add comments
* Fix configuration schema
* fmt
* Fix for lint
Co-authored-by: Iron-E <36409591+Iron-E@users.noreply.github.com>
Co-authored-by: hrsh7th <>
* Try to fix col adjustment (#843)
* Try to fix col adjuastment
* Improve duplicated text handling
* Bottom up mode for custom entry menu
When in command line mode, the custom entry window opens up to an
unexpected height, depending on the current count of completion items.
The above makes it hard to anticipate where to look at, and makes life a bit
harder.
This patch adds an option to open the custom entries view in a bottom up
mode, and flips the regular behaviour of next/prev entry in this mode.
Setup is as easy as:
```
cmp.setup.cmdline(':', {
view = {
entries = {name = 'custom', direction = 'bottom_up' }
}
}
```
* fix stylua complaints
* sylua barfs
* solve some corner cases
* properly reverse entries table
* make custom view follow cursor
* respect default as top_down
* stylua
* more stylua
Co-authored-by: hrsh7th <hrsh7th@gmail.com>
* Search mode horizontal view
Enabled by setting `experimental.horizontal_search = true`
* use stylua
* move to a floating window instead of abusing status line
* pass all tests
* rework
1. rename entries view file and memeber to wildmenu_entries_view
2. move config to config.view.entries
3. support both in insert mode and cmdline
4. make separator configurable by config.view.separator
* rearange wildmenu config
Changed config to:
```lua
view = {
entries = {name = 'wildmenu', separator = '|' }
},
```
* allow view.entries to be either a literal string or a table
Previously we didn't do this, which resulted in the documentation window
not being shown when switching through different completion items. Fix
this by firing the change event in select_next_item and select_prev_item.
